This thread is for discussing the use and features of my CAN-Do program.
----------Annoying Features Reported
1. With no Log loaded, "All Messages" (on Filters page) malfunctions.
2. Windows (like the Plot window) do not stay where you move them.
3. Make Slower/Faster work better before/during Dashboard "playback".Significant Bugs Reported
LEAFs CAN messages might occur on any of the LEAF's three major CAN buses: EV, Car, and AV. There is also a QC CAN bus, but it is not available at the LEAF's On Board Diagnostics (OBD) connector.
For example, a message-ID that appears to contain the "SOC" occurs on the EV-CAN bus about every 6 seconds while charging.
I have posted one 6-million EV-CAN-message example ".evc" file (a 6-hour charging session).
I have also posted a ".csv" file with a "recipe" for each of the various "decoded" values that have come to my attention.
These files can be read by my evolving "CAN-Do" program (also posted, for WinXP, Vista, and Win7). With these files you can use the program to look for yet "undiscovered" meanings in the 8 bytes of data that are part of each (most) messages.
to download copies of these files if you want to "play" in this game, without any hardware or expense. No, no User Manual yet.
CAN-Do can capture data from 1 to 3 CAN buses, write (and read) CAN-log files, help with analysis of the message data, do data graphing, and even display a time-lapse or real-time "dashboard" with some of the "discovered" values.