GeekEV wrote:OK, just in case he doesn't get to it, can you tell me which pins do what on your original diagram? Pin 1 seems pretty clear to be ground. Is pin 11 the +12v input trigger? And pin 5 the button press output? Is the output pin positive or negative? Based on my interpretation of the TR-7 functionality, I'm hoping it's a case of connect the +12 input to the negative output...
Oh, sorry. Red/11 is power (but it's switched ignition power) and black/1 is ground. When you press the button, a ground is put on 5(green).
If you need constant power, that's the blue on pin 13
Looking at the back (wire entry) of the connector, the "key" in the up position, there should be an empty terminal on the bottom right.
The wiring goes
Code: Select all
8 | 7| 6| 5| 4| 3| 2| 1 16|15|14|13|12|11|10| X