rwherrick
Well-known member
Hi Folks,
I'm hoping one of you can help me. I got a used Nissan Charging dock a couple of days ago, and it looks like the electrician who de-installed it was pretty rough, and yanked out a wire during the job. There's a little floating board (the "AV 17268-1 MOV Board") with heat shrink over it that has an unattached black wire. I'm guessing it might have been yanked out of the Molex connector on the top, between the blue and green wire (see picture below). I was only able to find a couple of pictures of the inside of the charging dock on the forum, and none that showed the cover. If anybody took pictures of the inside of the charging dock, including the wiring going to the top cover, could they post it to this thread? Or can anyone confirm how the MOV board shown in the picture is supposed to be attached? If not, I'll try attaching it to the empty slot on the cover, and see if it's capable of passing self-test before proceeding.
Thanks - Bob
Uploaded with ImageShack.us
I'm hoping one of you can help me. I got a used Nissan Charging dock a couple of days ago, and it looks like the electrician who de-installed it was pretty rough, and yanked out a wire during the job. There's a little floating board (the "AV 17268-1 MOV Board") with heat shrink over it that has an unattached black wire. I'm guessing it might have been yanked out of the Molex connector on the top, between the blue and green wire (see picture below). I was only able to find a couple of pictures of the inside of the charging dock on the forum, and none that showed the cover. If anybody took pictures of the inside of the charging dock, including the wiring going to the top cover, could they post it to this thread? Or can anyone confirm how the MOV board shown in the picture is supposed to be attached? If not, I'll try attaching it to the empty slot on the cover, and see if it's capable of passing self-test before proceeding.
Thanks - Bob
Uploaded with ImageShack.us