BillAinCT
Well-known member
Is there any issue with using the scheduling in my EVSE to start and stop charging? Does the Leaf "mind" having the charging current abruptly stop? I notice EVConnect doesn't know - it still says charging. I started charging manually and set a stop time to get me to 90% (I see about 10% per hour while charging). It stopped at 89%.
If charging has been stopped by the EVSE or you just want to stop charging, can you use the car remote to open the port. Doing this makes it click and blink like it has stopped charging. If the EVSE is left connected in this not charging state (assuming it is in that state after opening the charge port) is there still the risk of 12VDC battery drain?
Thanks!
Bill
If charging has been stopped by the EVSE or you just want to stop charging, can you use the car remote to open the port. Doing this makes it click and blink like it has stopped charging. If the EVSE is left connected in this not charging state (assuming it is in that state after opening the charge port) is there still the risk of 12VDC battery drain?
Thanks!
Bill