Page 1 of 1

Connecting DAB adapter. What are these wires?

Posted: Mon May 03, 2021 5:10 am
by Bigdrago
Hi there. I am connecting a anywave srt18 allowing me to get DAB channels etc and still use the original nav, display and buttons on steering wheel.

But I need to locate the 12V DC, earth, ignition power and + wire on one speaker. Can anyone point me in the right direction?

See bottom picture on left side, I guess this is for the speakers? And I wild guess is that the red wire might be a + cable to one speaker?
Where I hold my finger on the right side is the connector for power etc? I guess I will hook up the adapter to the red, black and yellow wire?

The FM antenna cable didnt fit my adapter. Anyone know what adapter for the cable I can use?

Image

Image

Re: Connecting DAB adapter. What are these wires?

Posted: Sat May 08, 2021 4:02 am
by Bigdrago

Re: Connecting DAB adapter. What are these wires?

Posted: Sat May 08, 2021 4:48 pm
by cwerdna
FYI, this forum is US-centric with some Canadians and a few others outside North America. We don't have DAB in the US, so most of us have no experience w/this.