Added in max and min cell pair voltages but instead of an average I have added the difference between best and worst CP in millivolts in parentheses after min voltage. The smaller the number the better balanced your pack is.
(The Leaf is out so this picture is taken with test data.)
Leaf is back so here it is again with real data. Put code in to auto adjust the y-axis grid interval.
Just enough room for average CP voltage. Note CP difference dropped to 12 millivolts from 16 after sitting for 30 minutes.
(The Leaf is out so this picture is taken with test data.)
Leaf is back so here it is again with real data. Put code in to auto adjust the y-axis grid interval.
Just enough room for average CP voltage. Note CP difference dropped to 12 millivolts from 16 after sitting for 30 minutes.