ritikatootie said:
Now I can't figure out how to read it. I've looked all over the SDG&E website and sent them email, but so far no luck. I'm hoping someone here may be able to offer some insight.
Here you go:
1. All Segments
2. Meter ID 2
3. 01 Current Date
4. 02 Current Time
5. 03 Summation 1 Rate A - kWh Total Del Only F+H
6. 04 Max Demand 1 Rate A - kW Total Del Only F+H
7. 05 Summation 1 Rate B - kWh Total Del Only F+H
8. 06 Max Demand 1 Rate B - kW Total Del Only F+H
9. 07 Summation 1 Rate C - kWh Total Del Only F+H
10. 08 Max Demand 1 Rate C - kW Total Del Only F+H
11. 10 Total Summation 1 - kWh Total Del Only F+H
12. 11 Total Summation 2 - kWh Total Rcvd Only F+H
13. 20 Last Season Total Summation 1 - kWh Total Del Only F+H
14. 23 Last Season Summation 1 Rate A - kWh Total Del Only F+H
15. 24 Last Season Max Demand 1 Rate A - kW Total Del Only F+H
16. 25 Last Season Summation 1 Rate B - kWh Total Del Only F+H
17. 26 Last Season Max Demand 1 Rate B - kW Total Del Only F+H
18. 27 Last Season Summation 1 Rate C - kWh Total Del Only F+H
19. 28 Last Season Max Demand 1 Rate C - kW Total Del Only F+H
20. 88 Security Log Cum Power Outage Duration
21. 89 Program ID
Note that if you are on NET (solar PV) metering, the display is ambiguous.
It will only show your Rate A/B/C consumption by time-of-use. It does not show your generation by time of use. All Generation (when the meter runs backwards) is combined into #11, Rcvd Summation. The meter internally tracks which time slot has which kWh subtracted, but it's not shown in the display rotation.
The EVSE meter is programmed to have less data showing, so you can't tell how much consumption was during Rate A/B/C. I don't know who writes the meter programs, but they're clearly not looking for the same information I am.