gbarry42
Well-known member
I like that idea! I may even give it a try. There are other photos in this thread. One person put a bezel around the display (actually it's a back that's larger than the enclosure) in order to block some of the glare. Another took the jacket off the cable and removed the extra wires (only 4 are used) and so wound up with a lot thinner cable.darelldd said:it is held from the bottom of the case with magnets.
Sorry...somehow missed the fact that your questions weren't answered. I'll take a crack at this.darelldd said:So... any help on what my display is telling me?
First of all, the first post of this thread has an explanation. And there are also a few YouTube videos (search "leafdd"), and since I had to find it to answer accurately, here's the link where Greg explains it to us.
So, anyway, you are mostly correct. The version number is three columns of dots, so yours is probably 1.2.2. In the video, we see version 1.1.2. The version is preceded by GIDs, as you surmised. And then the battery voltage, followed by current in Amps, and raw data that doesn't mean anything to you...all correct! The raw data has to do with reading the CANbus and sending commands to an add-on charger that's on the CANbus.
There's Aux (12V) battery voltage and a number related to the temperature on the DD at the bottom of the middle column. But it looks like you got the rest from the manual. Anything else, just ask. Hmm...just noticed, this thing has your initials imprinted on it