Sorry if these issues have already been addressed but I did a search and couldn't find anything.
Issue 1: LeafSpy Pro not connecting.
I have the recommended LELink OBDII device and my Android tablet shows it can see the device OK. When I start LeafSpy Pro it shows a connecting message with a "spinner" (really just alternates between / and \) at the bottom right of the screen and shows "LELink" in the bottom centre. But it fails to connect (I have waited over 5 minutes). It has worked in the past, so I'm not sure what's going wrong. I have tried clearing the application cache and forcing the application to stop; I have also tried a restart on the tablet all to no avail. Any ideas how to fix this? Is there a "right" sequence to do things, I have been doibng this: (1) plug in LELink, (2) turn on Leaf, (3) turn on tablet, (4) turn on Bluetooth and check LELINK device is seen, (5) start LeafSpy Pro.
Issue 2: On the two previous occasions I have connected successfully I get all the information screens, but the odometer reading is wrong (by a very large margin). What's going on?
Many thanks for any advice that can be offered.