EV Warning light on but no error codes in LeafSpy Pro

[cornbinder89]

Yes, Nissan Consult III is the tool, but cost more than the car does to buy one.

 

[nlspace]

Put it on a float charger (13.5V) to keep it fully charged at all times.

12.5 is only about 80% SOC

 

[PaPaSteve]

Yes, Nissan Consult III is the tool, but cost more than the car does to buy one.

Thanks for that.
Looks like there is no need to purchase the full dealer kit which includes the computer.
The software can be rented from Nissan $50 for a one day use.
Sorting out the interface connection between the car and computer is the key for the next step.
It will probably be a least a week until I have something in my hands.
Fortunately this car is a spare.

 

[cornbinder89]

The software can be rented from Nissan $50 for a one day use.

I did not know that!

 

[PaPaSteve]

Put it on a float charger (13.5V) to keep it fully charged at all times.

12.5 is only about 80% SOC

BTW
Page EVC-312 of the manual shows the first step is to confirm the 12V battery voltage is "11v or more".

 

[PaPaSteve]

I did not know that!

Nissan Software rental
Free software
Also free
Pass thru device $150
pass thru device $550