valerun
Well-known member
joewaters said:I knew it! Just as I got 8.7.6 installed last night, my thoughts went to how soon EMW would have the next one up.valerun said:Also, V8.7.8 is now posted on http://emotorwerks.com/JuiceBox_Public/8.7/50%20-%20Firmware/" onclick="window.open(this.href);return false;. It is still being tested but did check out at least on 2 of our cars.
Thanks,
Val
Aside, or rather my intended question, Has anyone else had a problem with interruption of the timer process affecting their Leaf?
Background:
JB premium rev 8.3 board with lcd no wifi
I plug in the car, with no car-side timer set, and the start timer on the JB active. I have a change of plans, errand or whatnot, and unplug the car to drive. Keep in mind, the charger HV relay is open, and no charging has taken place. My car, as far as I remember always throws up a charging error when I power it on. This does not happen if I interrupt an actual charge to use the car.
I installed v8.7.6 last night hoping there was a change in the JB to fix this. No luck.
I also have a Schneider Electric that has a timer, but haven't had the error on it.
I should pull the DTC code, but that would mean digging out my ELM and reinstalling LeafSpy Pro again, things that take time when I don't have enough.
Thanks for the update to the code Val, 8.7.6 is so user friendly compared to 8.3.
Thanks Joe - please flash with V8.7.8 that just got released (with a 'being tested' caveat but we did a number of Leaf runs on it already).