Hi. I have a 2015 Leaf S. I installed a Bosch level 2 (30AMP) charger on an existing 220v dryer line I wasn't using. Put in a new Nema socket and bought a Nema cable. The breaker is connected to two existing 20AMP circuits. It seems like when plugged in, my leaf is charging much faster than the dash indicates is should take with the 6.6kw onboard charger. I started charging last night with 41% and after about 1:50 of charging had 98% charge? The dash indicator said it would take 4:00 with 6.6kw. My question is whether I did something wrong with the wiring that is allowing it to charge too fast or if there is some miscalculation with the dash indicator? I realize that the final few percent take longer than the rest of the charge, but I just want to make sure I'm not doing something wrong. I'm heard that the dash indicator isn't that accurate and I assume that the car itself is limiting the incoming charge at 6.6kwh.