grommet
Well-known member
I didn't post this here, but it applies... from August 3:
"After a little over a year, my Blink EVSE (via EV Project) died Thursday with the infamous microSD card failure that kills the UI. Called Ecotality/Blink support and reported the problem. Mr. Electric, their contractor here, called me back within 90 minutes. They tried to schedule for the same day in the afternoon... but I was busy, so I picked Friday 8-9 AM instead. Mr. Electric showed up at 8:15. MicroSD card replaced. RFID reader removed. Tested. Done. Firmware on card was 2.1; I was previously running 2.0. Nice job, guys.
I did have to re-enter the Wi-Fi info, my off-peak charging schedule, and the PG&E Summer & Winter TOU kWh rates again."
Anyway, great service and everything is still stable.
"After a little over a year, my Blink EVSE (via EV Project) died Thursday with the infamous microSD card failure that kills the UI. Called Ecotality/Blink support and reported the problem. Mr. Electric, their contractor here, called me back within 90 minutes. They tried to schedule for the same day in the afternoon... but I was busy, so I picked Friday 8-9 AM instead. Mr. Electric showed up at 8:15. MicroSD card replaced. RFID reader removed. Tested. Done. Firmware on card was 2.1; I was previously running 2.0. Nice job, guys.
I did have to re-enter the Wi-Fi info, my off-peak charging schedule, and the PG&E Summer & Winter TOU kWh rates again."
Anyway, great service and everything is still stable.