I don’t know for sure, but if I had to guess, it would be the rolling resistance of All Weather tires. Rolling resistance is a more significant consideration with EVs.
Tire design is a series of compromises and improving one trait tends to sacrifice another.
Looking at Petro-Canada's website, they have now opened all of the EV Charging station on their Electric Highway. According to Plug Share, the most recent station (Burrard St. in Vancouver) opened on June 3. Apparently they plan to open more stations over time, but this is the last one from...
The other factor with using winters in summer is in warm weather your traction won't be as good in warm weather (the rubber gets very soft), thus degrading both your handling and stopping distance. This could affect your inseparability in a collision if the insurance company determines that the...
From what I have heard, that is about the average life expectancy for cheap EVSAs. Maybe you will be lucky and get 3-4 years out of it. A good one should last over 10 years.
I said if the service is full, not if the panel is full. Adding a sub panel allows you to add more breakers, but it...
Does the Nissan EVSA limit the current to 28A (current limiting is in 1A steps in the J1772 protocol) or is its limit higher and the charger inside the Leaf is the one limiting the current to 27.5A. Plugging a load that is capable of drawing more than 80% of the circuit's maximum would be a...
If you are confident that it is genuine, then great! It could be a cheap knock off though. You have to careful with cheap EVSEs sold on eBay and Amazon, as many aren't safety certified. Hardly a bargain if it burns your house down. :shock:
Durability is another factor. Cheaply made EVSEs...
For Flow and Tesla, you just buy a second EVSE at the same price as it is a standard feature on the Flow X5 and all Tesla Wall adapters.
ClipperCreek seems to sell them in bundles that appear to cost more than two individual ones, which seems strange. I don't really know much about their...
There is no industry standard. Here are the ones I know of. There may be others.
The Flo X5 uses HomePlug powerline communication.
It looks like the ClipperCreak Share2 charging stations use 3 low voltage wires .
The Tesla Wall Connector has a pair of low voltage wires that connect them in...
To each his own. I would prefer the flexibility offered by Power Sharing for the one time cost of making sure the wiring and configuration are done right (yes, the code does permit this configuration), as I can envisage situations where being able to charge one vehicle faster than the other...
IMHO, I would rather one 40 or 50A circuit with two 32 or 40A Power Sharing Electric Vehicle Charging Stations. That gives you the flexibility to quickly charge one car or divide the power between both cars. It would also likely be cheaper than having separate circuits.
The sub-panel route is...
The biggest issue with supplying backup/emergency energy when the grid is down is the the legal requirement of disconnecting your service from the grid when on backup power. This needs to be done by a separate piece of equipment, not the V2G/V2H box. That equipment will usually have a way of...
Maybe they could work a deal to have an adapter to allow Leafs to use Tesla Superchargers* and have new Nissan BEVs use the Tesla adapter. You often hear Tesla fans say that Tesla is willing to let other EV manufactures use their Superchargers, but none have negotiated this. This could be a...