24A Barbouri OpenEVSE with RTC is sold

I have a 24A OpenEVSE that is intended for use with a 240V 30A circuit breaker. It has an internal 30A 3AB fuse holder with brass dummy fuses installed. I have found that with our current hot spell the fuses ran at 190 degrees with my garage at 100 degrees. Setting the current to 20A was OK.

This is a Barbouri OpenEVSE version 4.2 main board. It has a L6-30 plug, a soldered crimps of a Rema Model Rev-1-30C Type 3R J1772 16 foot 30A cable , RGB display with RTC, GFCI coil, Potter Brumfield 30A relay, and a universal 12V power supply in a light gray off whitish box.

It will run at L1 120V 12A or L2 240A 24A. The Leaf max's out at 27.5A so it is slightly less. Although the current can be set in 2A steps to 50A the most a 30A breaker can use is 24A (80% of 30A). The cables are #10 gauge wire.

I am selling this for $300 plus 25 for shipping. Local testing and pickup is available in Anaheim near Disneyland. It is sold ASIS but I guarantee it will work upon receipt. I welcome your inspection.

_________________
2012 Cayenne Red SL traded for:
2013 Pearl White SL Premium

Why dont they use outdoor NEMA rated metal boxes with vents? Are there currently any airvents in the electronics box? Even stereo amplifiers have vents.

This unit is unvented and the enclosure was $18. Nearly everyone uses it indoors and a NEMA outdoor housing would be a major expense. As always I would be happy to make a unit for you with your specifications and expense.

The only NEMA box that I have used was surplus and I paid $20 for it unused. I do not plan to use any more NEMA cases. It would be possible to spend a couple of hundred dollars on a very nice case but who would pay for it?

http://www.ebay.com/itm/Outdoor-enclosure-for-Mikrotik-boards-NEMA-watertight-/380246241535?pt=LH_DefaultDomain_0&hash=item58887130ff" onclick="window.open(this.href);return false;

28 listings under $40 14 Under $25
http://www.ebay.com/sch/i.html?_sacat=0&_from=R40&_sop=15&_udlo=&_udhi=40&LH_BIN=1&_nkw=nema+outdoor+enclosure&rt=nc&LH_PrefLoc=1" onclick="window.open(this.href);return false;

kieranmullen said:

http://www.ebay.com/itm/Outdoor-enclosure-for-Mikrotik-boards-NEMA-watertight-/380246241535?pt=LH_DefaultDomain_0&hash=item58887130ff

28 listings under $40 14 Under $25
http://www.ebay.com/sch/i.html?_sacat=0&_from=R40&_sop=15&_udlo=&_udhi=40&LH_BIN=1&_nkw=nema+outdoor+enclosure&rt=nc&LH_PrefLoc=1" onclick="window.open(this.href);return false;

Click to expand...

I followed your link and heavy steel does not work for me.

I had someone asking about mounting options so I took a photo.

This unit is sold, Thanks Glenn