LEAFfan
Well-known member
Turbo3 said:4 Gids from my WattsLeft meter which is running at the same time through a Y cable.
Oh, ok. So will that help you make the 'Gids and 'Gids% more accurate?
Turbo3 said:4 Gids from my WattsLeft meter which is running at the same time through a Y cable.
LEAFfan said:Turbo3 said:4 Gids from my WattsLeft meter which is running at the same time through a Y cable.
Oh, ok. So will that help you make the 'Gids and 'Gids% more accurate?
No, same simple conversion as before. (remaining kWh/80='Gids)surfingslovak said:LEAFfan said:Turbo3 said:4 Gids from my WattsLeft meter which is running at the same time through a Y cable.
Oh, ok. So will that help you make the 'Gids and 'Gids% more accurate?
My guess is that Jim tweaked the formula. The delta in turtle mode was pretty small (6 'Gids).
Just retested 0.24h and it shuts down the monitor for me. Did you use the Back buttom, Exit from the menu or did you just press the Home key. The Home key does not shut the app down so in that case the monitor will still be running.drees said:I notice that with 0.24h the LEAF CAN Monitor is always running when it used to stop after hitting exit. Is that intentional? Need to test with 0.24i.
Still would like to see 'Gids modified to use this formula (details here):
GID = SOC% * 10 * (Ah / 65 * 0.3075) - 15
I suspect the current formula is fine on cars with 65 Ah+, but at least on mine with 58 Ah it diverges wildly at the low end.
1. Version 0.23e does not show all regen just the amount of regen being generated when the brake pedal is pressed. The information is coming from a CAN message and that is the way Nissan programmed it so that is all I can show.ht2 said:Tested 0.23e Regen page with HTC one S.
1. Seems not supporting accelerator pedal off regen even Leaf bubble show regen.
2. Some times regen value is bigger then target value. :?: (T=11 R=14)
3. There is no regen in slow speed braking for 2011 Leaf. (One of the improvement for 2013?)
Thanks for the wonderful app.
Ok, I see my bug.jclemens said:Tried 24i
After i exit, the icon remains in the status bar at the top, and i tried exiting with the back button, and the menu button. It does exit and i think it does dissconnect bluetooth, but i cant kill the app completely, even with task manager
Turbo3 said:For those with 2013 Leafs that are missing some temp sensors version 0.24k while have the correct code to handle that and display "n/a" instead of a large negative number.
Thanks!garygid said:The test versions are available through a button in Settings,
located at the bottom, in the Debug section.
You need a password for the first-time use.
At a "100%" (full charge), the dash reads 100% "Fullness of Tank" (FOT), I believe,... while charging at an L2 today, and the %SOC in the app
was right in line with the dash SOC +/- a few decimal percents (.2, .3, whatever)..
Enter your email address to join: