dhanson865
Well-known member
jdunmyer said:Apparently, the LeafLink app is dead/unsupported, so I'm forced back to the Nissan EV app. It works, but is slow and requires a lot of 'button presses'. I have to do this: (using iPhone 6)
Sign in.
Hit the "update" button (little circle thingy).
Wait, sometimes takes a few minutes.
Press the Climate Control button (Fan symbol at the bottom of the screen)
Press the button for "Climate Control Off". "On" is not available.
Wait for "Message has been sent" w/Checkmark
Monkey around, exit program, re-enter, until pressing the CC (Fan symbol) brings up the "Climate Control On" button.
Press the "on" button and wait for the "Message has been sent" w/Checkmark.
Exit restaurant and enter my warm car.
My main problem is the requirement to turn the CC 'off' before I can turn it 'on'.
Is this the way it works, or am I missing something? It sure would be nice to be able to hit just one or 2 buttons and have it happen, that would be almost as good as those poor slobs with their conventional Remote Start fobs.
I hope by sign in you mean you open the app and wait for it to open, if you are actually typing in a password you can automate that.
You don't need to do the update unless you want to see the range remaining / charging status.
Just go straight to the climate control. You will have to do the stupid off then on extra step unless you want to use the set timer interface and set the timer for 2 mins ahead or something.
You shouldn't have to exit the program and enter again to get CC on. You may not get confirmation right away and just waiting might be all you need to do.
All in all it sounds like you are doing 3 or 4 steps you don't need to do.