CHADEMO port not working

My Nissan Leaf Forum

Help Support My Nissan Leaf Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Hdipietro57

New member
Joined
Mar 11, 2017
Messages
4
I installed an OVMS module and disconnected the TCU in my 2016 Nissan Leaf. I ve been using the J1 charger since and it has worked well. Today I needed a fast charge. So after trying three different fast chargers. I finally realized that it was not the chargers but my port. Does anyone else have this issue.? I'm trying to figure out if it is the TCU module that controls the chademo port.
 
Use an OBD2 reader and check for charger DTCs. I had one set that prevented DCFC from working but L2 continued to be operational. Clearing the code resolved it.
 
Back
Top