[MOD : created from this thread: https://mynissanleaf.com/viewtopic.php? ... 10#p614031]
I think this forum needs a sticked wiki that explains what is possible with Leafspy and what's not.
So you are looking to upgrade the battery in your LEAF? You've come to the right place for information. Take some time to familiarize with the content. Please also note that battery upgrades might not be legal in your country (Norway has strict upgrade rules for example), so it might be worthwhile to familiarize yourself with your local legislation.
Different LEAF variants?
There are three major version changes between the LEAF models.
2011-2012 ZE0 (white interior, electrical handbrake)
2013-2017 AZE0 (dark interior, foot operated handbrake)
2018- ZE1 (new exterior style with 40/62kWh batterypacks)
There's also the 24kWh e-NV200, which is technically identical to the AZE0.
The battery packs (24/30/40kWh) are all the same physical size. The 62kWh pack is taller and requires spacers, more on that later. Here are the battery weights. Please note that you might need to re-certify your vehicle for the additional weight.
24kWh = 277kg (601pounds)
30kWh = 294kg (648pounds)
40kWh = 303kg (668pounds)
62kWh = 410kg (903pounds)
Most likely you are going to upgrade an older LEAF. There are a few things to keep in mind, first one being, are you doing a swap or an upgrade?
Battery swap vs Battery upgrade
A direct swap is replacing the same size battery with an identical one for the same version of your vehicle. A battery upgrade is installing a newer generation battery. Take a look at these 4 examples to learn the differences.
A 2011 ZE0 LEAF gets its 24kWh pack replaced by another 24kWh pack from a 2012 ZE0 LEAF. This is a direct swap.
A 2011 ZE0 LEAF gets its 24kWh pack replaced by a 24kWh pack from a 2015 AZE0 LEAF. This is a battery upgrade.
A 2013 AZE0 LEAF gets its 24kWh pack replaced by another 24kWh pack from a 2015 AZE0 LEAF. This is a direct swap.
A 2015 AZE0 LEAF gets its 24kWh pack replaced by a 40kWh pack from a 2018 ZE1 LEAF. This is a battery upgrade.
Now that we have swap/upgrade terms explained, let's tackle the easiest one first, the direct swap. After a direct swap has been performed, the only thing preventing you from driving the vehicle is a check EV warning light along with turtle mode. The fault code P3102 will be triggered. To clear this code and remove turtle mode, simply read DTCs and perform a P3102 clear with the latest Leafspy Pro version (0.46.172 for Android)(126.96.36.199 for iOS [Requires TestFlight]). That's it, enjoy the newfound range!
Picture of pairing screen (Accessible via first reading DTCs, and then selecting to clear P3102)
What about battery upgrades?
The battery upgrade is the procedure more commonly performed. This requires either one or two things.
If you are upgrading your 2011-2012 ZE0 LEAF, you will require a B24 22-36pin adapter. You will also need a CAN-bridge.
If you are upgrading your 2013+ AZE0/ZE1/e-NV200 vehicle, you will only require a CAN-bridge since the battery is mechanically plug'n'play.
What is a CAN-brige?
A CAN-bridge (also known as CAN-gateway/translator) is translating the newer style battery communication into an older format the the older vehicle can understand. It is absolutely mandatory
for safe operation and charging of the vehicle. There exists over 5 commercial solutions for this.
[*]EVs Enhanced [NZ]
[*]Dala's EV Repair [FIN]
[*]Véhicules électriques Simon André [CAN]
[*]+More that don't have English as primary target audience
What is a B24 adapter?
This section only applies if you have a 2011-2012 ZE0 LEAF. Nissan originally used a 22-pin connector on the battery for these vehicles, and starting from 2013+ they switched to using a 36-pin connector. The amount of pins are the same, it is only the physical connector that changed. If you are upgrading your ZE0 to the newer style, you have a few options on how to get the 36-pin plug.
#1 The cheapest option: Is to take it from the same salvage car that you took the battery from. You can cut a short section of the harness and splice it in with your old car. Example wiring diagram available here: https://github.com/dalathegreat/Nissan- ... umentation
#2 The easiest option: Is to order a premade 22-36-connector from a company (Muxsan, EVs Enhanced for example)
#3 The DIY option: Is to order the Yazaki connector and re-pin your harness. Yazaki part number 7287-1065-30 for the 36-connector and the pins are 7116441708 .
Special notes about the 2011-2012 ZE0 LEAF
The software on the oldest LEAF model is not that compatible with battery upgrades in general. As a whole it works, but there will be some annoyances related to instrumentation that requires more effort if you want it to perform 100% like factory. Now I'm speaking for my own (Dala's) experience, and the battery charge bars (the 12 one on the dashboard), will not really decrement like they should, and sometimes get incorrectly scaled when charge ends. It is possible to solve this with a VCM reflash, or by adding another CAN-bridge for the cluster. Depending on who you get the translation hardware from, they might have improved the situation with additional solutions for the ZE0. You can also ignore these cosmetic issues!
Special notes about 62kWh pack
If you are upgrading to the 62kWh pack from the 2019 e+ LEAF, you will require some additional hardware. The 62kWh pack is taller and has a slightly different mounting flange, so you will need spacers in order to bolt it down. This is not legal in some countries, since you are lowering ground clearance significantly (55mm?). Other than spacers, the rear springs need to be changed out to either the e+ rear springs, or custom made springs can also be sourced via Muxsan.
Special notes about the e-NV200
The e-NV200 van can only be upgraded from 24kWh to 40kWh, using a battery pack from another e-NV200. This is because the batteries have another physical shape compared to the LEAF, along with active cooling. So this rules out 30kWh and 62kWh upgrades. When upgrading a 24kWh e-NV200 to 40kWh, Leafspy can be used to pair in the replacement pack. Afterwards, an optional but highly recommended CAN-bridge can be fitted to fix instrumentation and quickcharge issues. For instance the Dala variant is open source software: https://github.com/dalathegreat/Nissan- ... ry-Upgrade
Special notes about factory warranty replacements
Nissan itself is offering warranty replacements(and out of pocket) for LEAFs. Here is what is possible via Nissan dealerships
2011-2012 24kWh LEAFs can get 24kWh new replacement packs (new packs with old type connector and BMS)
2013-2016 24kWh LEAFs can get 24kWh new replacement packs
2016-2017 30kWh LEAFs can get 40kWh packs when getting a warranty pack!
2018- No data yet
Below are some example videos, feel free to suggest