Going to upgrade my 24 Kwh 2015 that has 9 bars and disassemble it, use the cells for my solar system

Thanks!
I bought a car from Copart for my 40 kWHr pack upgrade, and the listings for the bigger (62 kWh) pack was always a "Plus". However, I used another trick to verify which size pack was in it: the car weight. They usually have a pic of the door jam that lists the curbside weight...and I remember the 40 kWHr packs were always ~1000 kg. Once you verify the weight for whatever pack type you're looking for, it will be consistent across all years for that body style (another advantage of the Leaf not changing much).Aftrburnr wrote: ↑Thu Sep 21, 2023 12:41 am Is it possible from VIN # to tell what Kwh battery a Leaf has? Tried decodethis.com no luck. Short of plugging Leafspy in... Looking at some Leafs that are at copart auction but they don't report what Kwh the car has. You can see pics of the bars tho, saw one that had 12 a 2017 and one maybe had 10 2016, but pic was cut off.
2023 plus is a downgrade to 60 kwh.Aftrburnr wrote: ↑Thu Sep 21, 2023 3:59 pm @Stanton Thanks for that! Had a look at some of the weights of the cars, my 2015 with 24 Kwh is 4193, some 16 & 17 were 4431 prolly 30 Kwh...
@DaveinOlyWA Perfect sir! Clue! Looks like #s 4, 5, & 6 of the VIN correspond to what you've indicated!
In some of these though with 10 or 12 bars, can't tell if battery hasn't replaced without plugging inWould not rather drive 70 mile round trip lol
The one I was looking at that can be bid on right now 24 KwhI did see a couple 30 Kwh but can't bid on them right now and from what I've read, 30 Kwh not the most popular choice. But, I guess if you can get one for $150-$500, not a bad deal.
Did see one 2023 it was an SV PLUS CZ1 in the VIN. Quite a bit of fun watching the live auctions hehe
I wasn't quite sure what you were trying to do, but if you aren't swapping the entire pack (case and all), then you have to swap "like modules for like modules". For example, you can't put 40 kWh modules into (the slots for) a 24 kWh pack...and that says nothing about BMS issues (you need a CAN-bridge/converter for pack swaps).