Please help 2013 LEAF

My Nissan Leaf Forum

Help Support My Nissan Leaf Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

2013LeafPDX

New member
Joined
Sep 23, 2022
Messages
3
Hello,

I am new to the forum so thank you in advance for any help I truly appreciate it. :)

I have a 2013 LEAF with 50,000 miles on it I bought it used during COVID and hardly drove it. I drove it a lot this past summer and use the AC. My car was recently in tbhe body shop to fix the back bumper that I dinged and made a crack.

When I got it out of the body shop I noticed a white powder residue in the car that was in the air vents in the front dash I also started noticing that the car was making a noise when driving or accelerating but not when I stopped or was idle. The noise was getting louder and I brought it back to the body shop they said it was not due to them. I brought it to a mechanic that specializes in EV cars.

They wrote this:

"I verified the noise during a test drive. I raised the vehicle and found that the noise is not coming from any of the wheels, but rather from the tranaxle assembly. I removed the fill plug to check the fluid level. The fluid was full, but in poor condition. Also, the fill plug has a magnet on the end, which was covered in metal from the inside of transmission. This metal is from whatever part inside failed. Recommend replacing the transaxle assembly."

Pics from mechanic here of the fill plug:

https://photos.app.goo.gl/gQ8ZzfxiwnJ9e1sP6

The mechanic said this is very rare to see this -
the price he quoted is thousands $$$$ - way more then I have and that was with used parts.
#zoinks :(

Now as I research this forum I'm thinking maybe the fluid needs to be drained or there's another option???
I have never did any fluid maintenance in the few years I had the car.

This is my only car, I am not handy. The only other shop in town can't even look at it till Oct. 22. Any ideas please?
THANK YOU IN ADVANCE !!!
 
I agree you probably need a new transaxle. Those metal shards are a bad sign and indicate something is wrong.

But.....several thousand $ is too high IMHO. You can probably find a used transaxle for much less and as far as I know, it's not a hard job to replace one. Ask your mechanic if his price is for a new or used unit. The transaxles do not fail often on Leafs so there should be an ample supply of them from Leafs that were crashed. Some mechanics will not work on used parts. In that case, I would shop around.

I doubt the car will leave you stranded but pay attention to the noise to see if it gets worse. I'd try to get this fixed soon but I would guess you can still drive it for weeks or months before it fails completely.
 
goldbrick said:
I agree you probably need a new transaxle. Those metal shards are a bad sign and indicate something is wrong.

But.....several thousand $ is too high IMHO. You can probably find a used transaxle for much less and as far as I know, it's not a hard job to replace one. Ask your mechanic if his price is for a new or used unit. The transaxles do not fail often on Leafs so there should be an ample supply of them from Leafs that were crashed. Some mechanics will not work on used parts. In that case, I would shop around.

I doubt the car will leave you stranded but pay attention to the noise to see if it gets worse. I'd try to get this fixed soon but I would guess you can still drive it for weeks or months before it fails completely.

Thank you - yes the quote was $3000 and that was with them using USED parts.
Do you think it would help to change my gear reduction oil in the interim?
Thank you again :)
 
Changing the reduction gear oil is a pretty simple job that any competent mechanic could figure out. If they want more than $150 to do that, then shop around. It's very unlikely to cure the noises, but it should help reduce any further damage.

The correct part number should be 32010-3NF0B, I found several matches on eBay for under $1000 USD, incl shipping. You could also check with wreckers in your area...

Did the mechanic break down the parts and labor costs for the $3000 quote? Based on the used price I found, $2000 labor is way too much. That job shouldn't take more than 2 hours for an honest, competent mechanic...

If it was me, I would buy the part myself on eBay and then find a mechanic who will charge less than $400 to install it.
 
alozzy said:
Changing the reduction gear oil is a pretty simple job that any competent mechanic could figure out. If they want more than $150 to do that, then shop around. It's very unlikely to cure the noises, but it should help reduce any further damage.

The correct part number should be 32010-3NF0B, I found several matches on eBay for under $1000 USD, incl shipping. You could also check with wreckers in your area...

Did the mechanic break down the parts and labor costs for the $3000 quote? Based on the used price I found, $2000 labor is way too much. That job shouldn't take more than 2 hours for an honest, competent mechanic...

If it was me, I would buy the part myself on eBay and then find a mechanic who will charge less than $400 to install it.

@Alozzy -
Thank you yes they said it would cost $1300 in labor. It's crazy here in Portland OR there's only two shops - the one I went to & the other one that I can't een get it checked out till Oct 22! Hey your not too far ... you ever come down to Portland ... I'll pay ya to fix it!!! :)
 
Road trip!! I would actually love to visit Portland, it's been too long. Unfortunately, I don't have the time just now.

Honestly, this isn't a job that requires an EV specialist. I would seek out a quote from an independent, competent mechanic. This isn't really much different than swapping out a transaxle on a 4x4.
 
I highly doubt that you need a new reduction gear assembly. It is normal for the magnetic drain/fill plugs to collect a lot of fine metal particles over time (especially when the car is new) so they would look scary at 50,000 miles if the fluid has not been changed before. I have attached a photograph showing the drain/fill plugs when I changed the fluid in my 2015 at about 60,000 miles and another showing the difference between the old and new fluid (obviously, the bright red is the new fluid). I will be changing the fluid in my 2019 soon because I have 54,000 miles on it now.

The white residue from the air vents is probably from the body shop. I suggest that you take the car out on the highway and drive a few miles with the windows partially open and the HVAC blower on high speed with the control set for fresh air (not recirculate). Switch between defrost, dash vents, and floor vents (run a few minutes in each mode). That should clear most of the residue from the air vents. It would be a good idea to replace the cabin air filter after this exercise.

I recommend that you have the reduction gear fluid changed (proper fluid is Nissan Matic S which is a synthetic automatic transmission fluid), rotate the tires, and make sure they are not underinflated before considering replacement of expensive parts. My experience is that the tires get noisy if not rotated every 5,000 miles so make sure tires are not causing the noise you hear.

Edited to add: I am sorry that I cannot attach the photos.
 
I agree with Gerry. Unless there are actual large shards of metal in the oil, and the assembly makes a grinding sound when turning, it is probably still usable. It likely just needs the proper lubricant, in the correct amount. It's certainly worth gambling the $100 or so to have that done, and quite possibly saving thousands of dollars.
 
Yes, it's normal for the first 5-10k miles or so, as the gears 'wear in' against each other. In fact, that's the main reason the magnetic plug is there - to catch the metal flakes from break-in.
 
I've never opened my Leaf's transmission but on other cars I've had, the magnet collected very small particles. The material was almost like a paste even though it could form into long shapes like the OP's picture. Wen rubbed between your fingers it was very fine. I still think any particles on the magnet large enough to be 'chunky' or felt with your fingers indicate there is a problem inside.

That said, of course the best approach is to change the fluid and see how it goes. It won't fail suddenly and even if it's making whining noises it could still run for quite a while, although if there are unusual noises that is another sign that something is wrong.
 
I wish I could post my photos (maybe the problem will get resolved soon) because the photos of the plugs (both drain and fill) from my 2015 at about 60,000 miles look about the same as the OP's. I was finally able to look at the link the OP posted on my computer and compare my photos to those side by side on the high-resolution computer screen. Therefore, I again recommend a fluid change before expensive repair work that is probably not needed.
 
Here are the photos that Gerry wanted you to see. I could have inserted the links into his post, but I really, really don't like to edit other people's posts - too much risk of changing or deleting them.

W2W0WkP.jpg


Z9NZPRi.jpg
 
alozzy said:
Merlot, or Rose? :lol:

I needed some containers to clearly show the old vs. new and a package of inexpensive wine glasses were the cheapest I could find that day (did not want to use glasses from the kitchen). I admit, it did look like two glasses of wine sitting on the workbench. Thanks to LeftieBiker for posting them--as you can see, the drain plugs have similar amounts of metallic debris to the ones from the original poster's car.
 
Back
Top