Lock system TYPE2

My Nissan Leaf Forum

Help Support My Nissan Leaf Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

pvins

New member
Joined
Dec 29, 2021
Messages
1
I'm looking for lock system for TYP2. Know anyone where is possible buy this lock?

Nissan LEAF 40kWh (2018-10)

Photos lock system
https://photos.app.goo.gl/oNMUHiCk8ca8Jbbv9
 
Unfortunately, this is a US-centric board with a few Canadians + a few outside those countries. We don't have Mennekes Type 2 inlets on our Leafs since we don't have that in the US. We have J1772 instead.

Hope someone can chime in...
 
did you find a replacement for the lock servo? or did you discover the manufacturer or part numer?

I've a noisy servo motor that make noise to unlock. Just do not stop when unlock and try to continue for a 0.5sec. Seems that he feedback/end interruptor is not triggered.

some feedbak is returned because manually you can rotate the lock until it reach a point that trigger relay in the relay box that ack VCm that something is wrong. I suppose or it's a resistenc value with a potenciometer or whatelse.

Another question. Wos it simple to open the servo case and mount it again?

BTW thank you for sharing the images, really useful

regards
G

pvins said:
I'm looking for lock system for TYP2. Know anyone where is possible buy this lock?

Nissan LEAF 40kWh (2018-10)

Photos lock system
https://photos.app.goo.gl/oNMUHiCk8ca8Jbbv9
 
According to a Nissan dealership service in Finland, the Type 2 charge lock motor is part of the whole internal Type 2 cable assembly so it is not possible to buy the motor separately.

The whole Type 2 cable assembly costs around 530€.

Maybe time to 3D model the gears… I have the same issue and the exactly same plastic gears broke from exactly same locations in mine, also a 2018 ZE1 Leaf.
 
Back
Top