No, it will not be 120 ohms. I just measured my working one without the resistor and get about 27.5 K ohms. I think you are OK to install it.DarthBane wrote:Hi Turbo, this is Frank (the 1st unlucky one to have a defective Konnwei, we talked via email).
So I have 2 bad ones now, one from Aliexpress and one from Amazon. I saw the fix, removing the little resistance you show on the picture... I did that, but, before I go ahead and brick my Leaf, I'd like to see if I did this correctly:
1st off, I could barely see anything there, we are talking microscopic almost! Anyways, I saw something, and flicked it off with my fingernail, and it came out. Really small stuff.
Then I re-tested the resistance, and now the needle does not move at all when testing pin #6 to pin #14. Is that a good sign, or should it have gone back to 120 ohms?
If this is right, then I will plug it in and see what happens. I'll probably fix the 2nd one too instead of returning it, I could use it with Torque on my other car I guess.
Thanks for all the help!
Your phone can only connect to one device at a time. The bluetooth connection to the car is automatic when it turns on. This prevents the connection for LeafSpy from working. I use a separate tablet for LeafSpy, so that I don't have that problem.Battlewind wrote:I ended up sending it back for a refund. I couldn't get it to work properly. I had an older ELM327 that ended up working fine once I turned off the car's bluetooth. Now I have to figure out why they won't work together.
That might be true for their phone, but is not a general truth. LeafSpy works fine with my phone also playing music through the car while also connected to my watch. Bluetooth is supposed to work with multiple devices at the same time, at least as long as they have different functions.baustin wrote: Your phone can only connect to one device at a time. The bluetooth connection to the car is automatic when it turns on. This prevents the connection for LeafSpy from working. I use a separate tablet for LeafSpy, so that I don't have that problem.