Have just been logging data from my car
logged the EV line with car off , just plugged in charger to front of car so ignition was never turned on.
These messages will come from the PDM/Charger unit so not changing them
PDM ID #390
PDM ID #393
PDM ID #679 - Lots people say its when charger plugged in, but seem to mean that powered up PDM
The Inverter #1DA I cant change it connected to my stack so will not simulate that and let it do it things.
This is what I got from car logs if want to simulate it for a stand alone unit
INVERTER #1da BE 40 18 0 0 1 0 7E
INVERTER #1da BE 0 18 0 0 1 1 59
INVERTER #1da BE 0 18 0 0 1 2 53
INVERTER #1da BE 40 18 0 0 1 3 74
Has been said that need
1DB, 55B,5BC and 59E from battery
I could not see any 59E when did my logs
And 55B and 5BC only showed up near end of logs when I pulled the plug out.
So think may only need 1DB and this sequence I seen on mine, which give back charge state of battery
HVBAT #1db 1 20 BE AB 2B 0 0 37
HVBAT #1db 1 20 BE AB 2B 0 1 B2
HVBAT #1db 1 20 BE AB 2B 0 2 B8
HVBAT #1db 1 20 BE AB 2B 0 3 3D
Then is the messages that came from the VCM 50B, 11A, 1F2, 1DC
Where don't think 1DC needed, as only seen it when I had charger plugged in and was not powered up
Either way this is what I logged
VCM #11a 1 80 0 AA C0 0 0 60
VCM #11a 1 80 0 55 0 0 1 76
VCM #11a 1 80 0 55 40 0 2 BB
VCM #11a 1 80 0 AA 80 0 3 AD
VCM #1f2 30 73 20 B4 0 3C 0 87
VCM #1f2 30 73 20 B4 0 3C 1 88
VCM #1f2 30 73 20 B4 0 3C 2 89
VCM #1f2 30 73 20 B4 0 3C 3 8A
VCM #1DC 6E 4 CF FD 1 10 E1 C1
VCM #1DC 6E 4 CF FD 5 2C C6 CF
VCM #1DC 6E 4 CF FD 8 C0 C3 DB
VCM #1DC 6E 4 CF FD C DC DC 4A
They all just sample of the patterns I found
Will try again tomorrow to update my code to direct inject these values
Else im gonna lift my car up, push this battery under it and swap the HV lead over to charge it ;-)
As just want a charged battery to try my boat out.