Agreed—the H9 glow-worms on my 2013 Leaf X (JDM) were pathetic, so I replaced them with LEDs. H9 equivalent LEDs seem to be very scarce, so I took a chance and ordered Auxbeam H11 equivalents from Amazon. The right side fitted straight in, but on the left side there was an issue with the bulb's aluminium heat sink getting tangled up with a piece of metal in the very restricted space, which prevented it from turning to lock into place. I carefully filed the heat sink to provide clearance. Significantly improved light output (8,000lm and only 25W per bulb instead of 65W), but ideally the beams need to be raised slightly. Has anyone any idea how to do this? There are a couple of hex head screws with a Philips recess that might be adjusters, but they're not easy to access and it would be good to be certain before diving in and possibly messing up something. Thanks.
Last edited by ardony
on Thu Jul 19, 2018 9:01 pm, edited 1 time in total.