2013 110v EVSE release latch repair photos

I took some pictures while I was working on repairing the broken release latch on a 2013 leaf 110v EVSE handle. In particular I believe seeing the locations of the metal pins may be useful to others wishing to perform this repair.

As far as the repair itself goes, I simply glued the broken off side pegs back to the latch arm and then drilled a hole through them for a metal pin to provide them with more support.

https://ibb.co/album/MB0MYD

Great pictures of inside the handle, thanks for sharing.

Very helpful indeed to see the location of the metal pins, made opening the plug to repair the latch much easier.

Thanks for sharing!