Search results

Is there a way for me to share my google sheets with you? (email?) I could share a spreadsheet for F23/NC and F23/FC and a google sheet for CN100/FC both includes wire color, pin and function. So when I or you make changes they would reflect in both of our shared sheets. This is not a static...

I am comfortable with the hardware connections etc. have you been able to make a list of all wires needed: Example: Extend yellow cable in the "F23 harness" Purchase socket called "???" etc etc

I meant the harness OUTSIDE the PDM, where the QC harness data cable plugs into the harness that feeds the PDM with F23.

How can I add the E7 plug to my Leaf devoid of QC wiring? need a wiring diagram. For the control wires, the connection is made thru the big black harness in the car that contains the wiring and Connectors E7, E8, F1, F23. On a non-Chademo car this harness will be missing the E7 connector.

How does the QC harness connect to the PDM?

hvdc - is duplicated on the left solder joints. HVDC + no connection between the two. empty holes at TP717 connect to nothing

Zener diode BZD27C75P marking code is G2 voltage about 80v, 10 ma, https://www.vishay.com/docs/85153/bzd27series.pdf How does one find a alternative SMD, since this one is hard to get? what do I have to look for in a alternative...

1 QC temp sensor simulation resistors active. (did not produce/remove a DTC code) 2 PDM cover closed and bolted on front side ( how is the PDM interlock switch depressed?) (interlock gone) 3 How does one satisfy the QC voltage sensor? B2830 QUICK CHARGE VOLTAGE SENSOR The quick charge voltage...

Ign button, Break Depressed, Neutral. Would not go into drive.

I removed the QC temp sensor simulation resistors B2830-96 09 Charger Q/CHG voltage sensor VC-66 B2830 QUICK CHARGE VOLTAGE SENSOR The quick charge voltage sensor is integrated inside the PDM (Power Delivery Module), and detects the volt- age at the + side and − side of the high voltage...

DTC rpt #1 Temp Sensor Simulating CN100 correctly seated All codes cleared Code - B2840- 96 09 VC-74 Charging Capacitor - Erroneous Code - Quick Charge (QC) wiring needed. B29C1-94 09 EVSE VC-98 QC Temp Sensor - Erroneous Code - Quick Charge (QC) wiring needed. B2902-9601 Charger OBV Memory...

FC Temp Sensor - simulation 22k ohm resistor

what is a plenum? Running the tmp sensor test I realized that the previous errors were cause by the connector for CN100 plug NOT be seated correctly. I ran Leaf Spy and will send them to you by the morning.

California's right to repair law, pertains to products made AFTER the law took effect. (2024) I wonder what aspects of repair are covered for products made before the law was passed? Do new Leaf's use the "old" boards? https://en.wikipedia.org/wiki/Right_to_repair

does this space allow for a Go Fund Me Account to pay for legal fees to compel Nissan to turn over the schematics for a PCB's in all Leaf's?

Need to simulate the sensor....since I don't have a Quick Charge Port installed. how do you suggest doing that? Dala 9 wires pops contains this I can buy a fast charge port for $100 but not for the 2013. otherwise they are $500 t0 $1000 for new VC-96 The quick charge port contains a temperature...

B&R Salvage Tucson...don't know history. Electrical Parts are exchange only (fine print of 90 day warranty) $340 two people one with experience and one with money the one with the experience ends up with the money the one with the money ends up with an experience.

the video is fun to watch but the devil is in the details. https://mynissanleaf.com/threads/2013-leaf-pcb-repair-replacing-smd-surface-mounted-device.35576/#post-644064 I am trying to figure out how to do it. ck it out

D108 picture from Fast Charging PDM

Yes all functions, including regenerative braking were working, except charging.