Search results

Thank you. I will have to go back to nissan again. This is always an issue. I live in south africa.

Hi nlspace Thank you for your reply angain. We already removed the D547 diode from the board, tested it, (it works), and soldered it back. Whether or not the diode on the control pilot is there, im getting the same exact issue. I was just following a few suggestions to do that. I will now...

Thank you for your reply nlspace I appreciate your help immensely. "The B29C1 code is related to an EVVSE failure that could be due to 5 possible conditions: an invalid PWM signal during charging; or an interrupted PWM signal; the AC power supply is not applied when commanded; the AC power...

Long story short : Ac charger not charging, not diode problem 2011 24 kwh leaf with 3na7a on board charger, gen 1, in the back of the car. - Ac charger not charging on lvl 1 or 2 on any charger. Tested many different chargers. - Chademo still working and charging fine. - 10 second and 3...

Well done, and thank you for all the information and the photos. I have also opened my obc but i left it in the car without removing the coolant lines, You can pretty much disconnect the main hv connector on the floor and then open the charger lid and work on it without removing it from the car.

I have this exact same problem in my 2011. How did you fix this ?

Well done for identifying the issue and getting it fixed. Thank you also to everyone that helped and posted and replied in this thread. I learned a lot about my leaf and my issue that im having.