Recent content by silverbrewer

My Nissan Leaf Forum

Help Support My Nissan Leaf Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. S

    Leaf Spy and Leaf Spy Pro

    Yes, sorry! Version numbers. I am trying to interrogate the vans original 24 kWh BMS so I can fit a 30kwh BMS and have it work. I am removing the 24kwh battery and replacing it with a set of 60 ah pouches configured 96S4P. As they are NMC pouches, I am assuming that the BMS from a 30kwh Nissan...
  2. S

    Leaf Spy and Leaf Spy Pro

    My screen showing the Ecu serial numbers was not the same as Dalias, and did not show the BMS info. Could it have been that Dalia had Beta privileges?
  3. S

    Leaf Spy and Leaf Spy Pro

    I have seen LeafSpy being used to capture the BMS serial number from a battery, but when I tried it, it was not appearing? Does my LeafSpy need updating?
  4. S

    Nissan e-NV200 battery cooling and system changes

    Fan and ducting! I seem to be missing the battery heater relay module, and the heating element plates! Does anyone know if they can be omitted as my use age will not get that cold, or will it sense there are parts missing and throw a code? I also need an AZEO service plug. Anyone got one spare?
  5. S

    Nissan e-NV200 battery cooling and system changes

    Here is the internal cooling system [img][https://share.icloud.com/photos/0RFuEE_H_C7ffOhiPqH1PXg4A#Sutton_Coldfield_-_Walmley/img]
  6. S

    Nissan e-NV200 battery cooling and system changes

    I have an e-NV200 workshop manual, and the Traction battery section is a cut and paste job from the leaf. There is no mention of the aircon derived cooling system within the battery case, the additional wiring that involves, or the fact that while the cell circuitry is exactly the same as the...
  7. S

    Monitoring multiple thermistors

    I am fitting 32 battery modules that are each configured 3S4P and use 60ah pouches, so 284 pouches in total. Each module has two thermistors, so 64 of the damn things! Does anyone know of anyone who has figured out how to build a standalone temperature monitoring system with in built high and...
  8. S

    Is e-pedal retrofittable?

    That is interesting. Thanks. I have communicated with Emile at Muxan on various topics, and found him to be very helpful. Is there a thread somewhere on this use of the Muxan can bridge, or is this something you have experimented with yourself?
  9. S

    Is e-pedal retrofittable?

    Can the e-pedal one pedal driving be retrofitted to earlier Leafs or E-NV200’s? Does anyone here have a working knowledge of its operation?
Back
Top