Recent content by Cees

Has anyone come across messages on the EV CAN bus like below, i.e. with frame ID 0x004 and 0x18 CC 07 BB? id dlc d0 d1 d2 d3 d4 d5 d6 d7 00000004 8 0 8 0 0 0 0 60 0 00000004 8 0 20 0 0 0 0 80 0 18cc07bb 7 18 CC 7 BB D0 0 0 0 Cheers.

The python code is running on a Raspberry Pi with an SkPang PiCan board. Just a leftover from a previous project. The OBC detects and reports the AC voltage on CAN 390 when it plugs in, so I have no reason to doubt the J1772. On another note. When your setup is working, does it stop charging...

Thanks Peter. I appreciate your effort. Are you saying it has been done on a 2014 before? Sorry again for a misunderstanding: where I wrote "the contactors are closed" I meant that I closed the contactors on the battery. I have not heard the relay(s) clicking in the OBC. I will doublecheck the...

My OBC is from a 2014 Leaf.

Thanks for your response Peter. Just to clarify a few things. The 'example' at the end of my previous message is not code but is my way to present a table, an overview of the differences between the frames in your and Damien's code. I used the code markup in order to layout a table as rows and...

@49thdiver and @jackbauer I have tested the Gen2 setup as posted by Peter, but no luck. The OBC sends 0x679, 390 and 393 frames. I can see the AC voltage being signaled going up from 0 to 200V. The DCDC output is there as well, charging the 12V battery, but nothing is happening on the high...

Hi all, I'm attempting the same (running OBC standalone) with a 2014 Gen2 one. Because that's what I've got lying around in case you're wondering :). I've got most of the original loom connecting the PDM to the type 1 charge port and 12V battery. An Arduino + CAN shield are playing VCM on pins...

Hi Daklein, No progress I'm afraid. This is what I know. Gen1 PTC heaters fail from time to time. It's typically the same components that fail on the circuit board. Whether these components are the cause or the victims, I don't know. Boards that failed show a specific bit as high in the LIN...

Interesting. Does this help? https://photos.google.com/u/3/photo/AF1QipOQ_bC69cIJghe8ABomVj_uQJ9TsuU-Fyt8uPWf

Hi all, I'm a newbie who likes to tinker and fix stuff. Has anyone on this forum looked at the LIN comm's on a Gen1 between the AC Auto Amp and the PTC heater and the A/C compressor? I'm interested in this for repair as well as for re-use of these components in other applications. I'm trying to...