Steel wheels
- Thread starter nader
- Start date
Help Support My Nissan Leaf Forum:
Supposedly Altima wheels have the right bolt circle/pattern and hub diameter - just need to confirm that the offset is correct.
Tirerack.com lists the offset for steel wheels on a 2010 Altima as 42mm - IIRC that is within a couple mm of the LEAF.
Yep, it appears to be good.
http://www.mynissanleaf.com/viewtopic.php?p=73305#p73305
Just might want to double check that there's 2mm of clearance on the inside between the wheel/tire and strut, but it shouldn't be a problem.
Tirerack.com lists the offset for steel wheels on a 2010 Altima as 42mm - IIRC that is within a couple mm of the LEAF.
Yep, it appears to be good.
http://www.mynissanleaf.com/viewtopic.php?p=73305#p73305
Just might want to double check that there's 2mm of clearance on the inside between the wheel/tire and strut, but it shouldn't be a problem.
garygid
Well-known member
Aren't the Altima wheels 16x4 but the LEAF's are 16x6 (or is it 16x6.5)?
Just called tire rack. A 16x6.5 Altima steelie, 42mm offset, is $56/wheel. Not sure why I couldnt find it on their website. oh well. Now to find some used Altima take off wheels! Should be able to get a set of 4 used wheels for 100 bux.
-Nader
-Nader
I'm seeing 2011 Altima rims on CL for sale. Will they definitely fit the Leaf? They look like alloy rims, not steel...
EDIT: the ad says they are "ELBrus rims."
EDIT: the ad says they are "ELBrus rims."
Similar threads
Latest posts
-
Any reason not to buy approved/used 62kwh Tekna (UK)?
- Latest: Bombastinator2
-
-
2018 Setting only END time on charge timer.
- Latest: Virtuallydead
-
-
-
