Ok guys. I have finally gotten around to trying to fix my abnormal state issue as I first posted about here on page 23 and 24 of this thread. I am trying to follow Val's (and other's) help.
I have everything connected and am in Arduino. I found the line Val told me to change. I changed it. Then what do I do? I assume I need to save it or upload it somehow. So I click on Verify or Upload. It starts checking everything and comes up with an error on line 359 which is nothing I changed. I copied and pasted the error here-
This report would have more information with
"Show verbose output during compilation"
enabled in File > Preferences.
Arduino: 1.0.6 (Windows 7), Board: "Arduino Uno"
EMW_EVSE_firmware_V8_7_9.ino:70:30: error: EEPROM_VMcharger.h: No such file or directory
EMW_EVSE_firmware_V8_7_9.ino: In function 'void setup()':
EMW_EVSE_firmware_V8_7_9:359: error: 'EEPROM_readAnything' was not declared in this scope
EMW_EVSE_firmware_V8_7_9:410: error: 'EEPROM_writeAnything' was not declared in this scope
EMW_EVSE_firmware_V8_7_9.ino: In function 'void loop()':
EMW_EVSE_firmware_V8_7_9:531: error: 'EEPROM_writeAnything' was not declared in this scope
EMW_EVSE_firmware_V8_7_9:619: error: 'EEPROM_readAnything' was not declared in this scope
EMW_EVSE_firmware_V8_7_9.ino: In function 'void ctrlMenu()':
EMW_EVSE_firmware_V8_7_9:1027: error: 'EEPROM_writeAnything' was not declared in this scope
EMW_EVSE_firmware_V8_7_9:1100: error: 'EEPROM_writeAnything' was not declared in this scope
Is this because I have some sort of error in my folder set up? Please forgive me, I am not too familiar with changing code. I can diagnose and work on cars all day mechanically though.
Help please?
Thanks!
Ryan