EVSE Pedestals

My Nissan Leaf Forum

Help Support My Nissan Leaf Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

smkettner

Well-known member
Joined
Aug 10, 2010
Messages
7,501
Location
Orange County, CA
What other options are there for an EVSE pedestal?

I see Clipper Creek has the HCS-40 with a nice pedestal mount.
http://www.clippercreek.com/store/product/hcs-40-pedestal-mount-30a-240v-charging-25-cord-copy/

evchargesolutions.com has a decent pedestal
http://www.evchargesolutions.com/product-p/uniped.htm

I like the ClipperCreek but only comes with HCS-40 and need something to mount an LCS-20 as the subpanel is limited to 60 amps.
Low cost is important so the Leviton, Schneider, GE etc are a bit much.

Any other suggestions?
 
smkettner said:
What other options are there for an EVSE pedestal?

I see Clipper Creek has the HCS-40 with a nice pedestal mount.
http://www.clippercreek.com/store/product/hcs-40-pedestal-mount-30a-240v-charging-25-cord-copy/

evchargesolutions.com has a decent pedestal
http://www.evchargesolutions.com/product-p/uniped.htm

I like the ClipperCreek but only comes with HCS-40 and need something to mount an LCS-20 as the subpanel is limited to 60 amps.
Low cost is important so the Leviton, Schneider, GE etc are a bit much.

Any other suggestions?

Call Clipper Creek and tell them what you want.
 
smkettner said:
What other options are there for an EVSE pedestal?

I see Clipper Creek has the HCS-40 with a nice pedestal mount.
http://www.clippercreek.com/store/product/hcs-40-pedestal-mount-30a-240v-charging-25-cord-copy/

evchargesolutions.com has a decent pedestal
http://www.evchargesolutions.com/product-p/uniped.htm

I like the ClipperCreek but only comes with HCS-40 and need something to mount an LCS-20 as the subpanel is limited to 60 amps.
Low cost is important so the Leviton, Schneider, GE etc are a bit much.

Any other suggestions?

You may have already found it, but Clipper Creek does sell a stand alone pedestal. (It was on page 5 of the "In the parking lot" section)
http://www.clippercreek.com/store/product/single-mount-pedestal-kit" onclick="window.open(this.href);return false;
 
Is there some reason that you can't just mount it to a pressure treated 4x4 set in concrete? That would be much cheaper than these other options.
 
davewill said:
Is there some reason that you can't just mount it to a pressure treated 4x4 set in cement? That would be much cheaper than these other options.

+1

You can get 4x4 post sleeves and caps in practically any style you want from less than $10 and up- from flat colored vinyl to faux stone. You can make it as ghetto or luxurious as you want. :)
 
Back
Top