estomax wrote:i think your best bet is just pinning the signals right at the 8 pin connector that plugs into the rear door switch. compare the 1-8 numbers in altima to the 1-8 numbers in leaf. Leaf just has wires in pins 1-5, now move the wires in pins 1-5 around so that wire in
pin 1 goes to pin 4,
pin 2 goes to pin 8
pin 3 goes to pin 7
pin 4 goes to pin 5
pin 5 goes to pin 6
the altima has an extra ground on pin 2 that you may need to add somehow and is missing on the leaf, i believe is the ground for the little led light. hopefully the pins come out of the connector without a super special tool.
thank you, i think your right.
i think your also right about the pin 2 being the LED light ground but i scoured the FSM and i couldn't find what that symbol meant shown in the pic...the circle triangle symbol at pin 2. im guessing thats the LED symbol.