Swapping Halogen out for LED (complete assembly)

My Nissan Leaf Forum

Help Support My Nissan Leaf Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

nzphilip

Member
Joined
Jul 3, 2015
Messages
6
Hi,

I may have the opportunity to swap out a complete halogen housing assembly for an LED assembly (both drivers and passenger side).

Is there any reason why this would not work (i've checking the service diagrams and all connections are exactly the same)?

Is there any other reason why I would not want to do this?

Thanks!

-Philip
 
Id like to know too. I have a junkyard I know that has a couple of dead Leafs with the LED lights, but I figured I would leave the perfectly good, running halogen lights alone... It would be cool to just replace the lights with LEDs if it is just plug and play??
 
I did the swap on my 2013 SV, requires cutting connectors off of both and re-splicing. I didn't wire the LED dash failure lamp, just red to +12 with lights on and black to ground.

Lighting is improved, but it isn't everything that I had hoped for.
 
Back
Top