If those bother you, doesn't the obnoxious advertising license plate holder bother you :?:tuanies said:Just got the tail lights covered with red film/tint. I'm not a big fan of chrome or taillights so I had this done to my wife's car. Next up is debadging, window tint and vinyl wrap on the door handles.
...
OMG, my exact same question. What an eye-sore, :shock: .TimLee said:If those bother you, doesn't the obnoxious advertising license plate holder bother you :?:
At least it is removeabletuanies said:Lol it doesn't really bother me. I'll take it off eventually.
I have paid twice and I am on automated renewal and have not received or been offered MNL license plate holder.mbender said:Join/contribute here and you get a "free" mnl frame! Or at least you used to...
TimLee said:At least it is removeabletuanies said:Lol it doesn't really bother me. I'll take it off eventually.
Not like the obnoxious hard to remove paint damaging decals that way too many dealers stick on every vehicle the minute it comes off the truck.
But the holes in the front bumper of my Altima still irritate me. Put there by the dealer to mount their advertising front plate holder, in a state that doesn't require front license plate :!: :shock:
TimLee said:I have paid twice and I am on automated renewal and have not received or been offered MNL license plate holder.mbender said:Join/contribute here and you get a "free" mnl frame! Or at least you used to...
Did you have to request it :?:
tuanies said:Just got the tail lights covered with red film/tint. I'm not a big fan of chrome or taillights so I had this done to my wife's car. Next up is debadging, window tint and vinyl wrap on the door handles.
I would have never bought the car if they pre drilled the holes for the plate and if they did it after the deal was done I'd refuse delivery of the altered carTimLee said:At least it is removeabletuanies said:Lol it doesn't really bother me. I'll take it off eventually.
Not like the obnoxious hard to remove paint damaging decals that way too many dealers stick on every vehicle the minute it comes off the truck.
But the holes in the front bumper of my Altima still irritate me. Put there by the dealer to mount their advertising front plate holder, in a state that doesn't require front license plate :!: :shock:
I was on severe time constraint.apvbguy said:I would have never bought the car if they pre drilled the holes for the plate and if they did it after the deal was done I'd refuse delivery of the altered car
tuanies said:
tuanies said:I'll probably just pay the same people to vinyl wrap the door handles and front chrome part, but its up to my wife since its her car.
The window tint blocks out ~50% of solar heat, so for my rear facing 18 month old, that should make her quite a bit more comfortable in the summer. She gets super sweaty back there on hot days, but is fine in my ICE car with 20% tint all around. I don't even have the AC cranked up at all in my car either. Also by blocking out the solar heat, you keep the cabin cooler and make the climate control not work as hard, theoretically conserving range.
It is about time.lion said:.. But they have been cracking down in my area (since it's illegal in NY, at least for the front sides)...
tuanies said:
SLCSlugger said:Did you have a tint shop install the red overlay on those tails for you or did you buy a precut kit off the net?
I've dealt with Lamin-X in the past. I was hoping they offered products for the Leaf but I don't see anything on their site unfortunately.
Enter your email address to join: