Search results

For those using the development version of LeafSpy Pro (available using the following Link), this feature will be available in the next release 0.45.160. iOS version will be updated later. Converted my US Leaf to Japanese and back with it...

What does the ";100" do? I don't seem to see that in the ELM manual. ========================== I am thinking it is an ELM327Chat command perhaps for delay to wait for a response.

If you have a WiFi OBDII adapter and the state shown in the lower right corner gets stuck and loops around state 11 then your WiFi OBDII adapter most likely does not support the needed ELM commands to communicate with the Leaf's proprietary protocol. I have seen this on the newer batch of WiFi...

First, thanks for the feedback. It really helps. - I am working on a new version that automatically disables Safe Mode when needed. The message at the top of the charge graph will be removed as it will not be needed. - The last 6 hex digits come from the Android device. If you use two different...

Here is a test of two full power run on my 2011 Leaf (5 Bars lost) using the BMS custom screen and the special Recording mode that creates a .csv file of the data. Here is the Internal resistance for the first run. Resistance from second run.

Uploaded test version 0.45.124 that fixes a number of bugs put in the previous version one of which caused app to crash. - Fixed bug that caused app to crash if no Battery Temperature data or Battery Temperature data was cleared. Result of change made to previous version. - Removed debug code...

Test Version 0.45.123 just uploaded. - Fixed scaling problem on Battery Temperature Graph (screen 2) when using Centigrade. - Fixed problem on certain model year Leafs where battery SOC, AHr, Voltage, current and Hx would not be displayed and showed as zero.

Seems there was actually missing code so I am not sure how the iOS version worked. Logging without Cell Pair Voltages enabled should now work with test release v0.45.122. https://play.google.com/apps/testing/com.Turbo3.Leaf_Spy_Pro

Just uploaded test version 0.45.121 with fix for not logging if not reading cell pair voltages. Also includes fix for app crashing when Uploading to Dropbox that I have seen in the crash reports from Google. Anyone who has has 0.45.120 crash let me know if this fixes the problem as I have know...

Must be some indirect connection I don't see yet. ======================================== Found the bug. One line of code needs to be deleted that required the cell voltages to be read or it would not log.

Toggling between tire pressures and battery temperatures is an option. A single tap on that sub panel will disable alternating so the current selection stays. A long tap enables alternating between the two displays. Ambient temperature should still be displayed. Should display "**" until a value...

I checked the code and there is no connection between the "Log Cell Voltages" option and writing to a Log file. It only controls whether the Cell Pair voltages are read from the Leaf and saved to the Log file. The only thing I can think of is you have selected a custom screen 3 and are viewing...

The LELink^2 works fine with a 2019 Leaf. You should just not enable the special zero power mode when used with a 2018 or newer Leaf. Zero power mode comes disabled and if LeafSpy Pro detects a 2018 or newer Leaf the option to enable zero power mode is blocked. The Carista works with LeafSpy...

Thanks for the additional information that helps. I implemented this function for the iOS version where I tested it. Then I ported it over to the Android version which I think I did not actually test so I am probably missing a little code when I ported it over. Should be a quick fix but I am...

After thinking about it I now see you can collect the data to create the graph with this new test version. Go to the custom Screen 3 and load one of the BMS Grp1 screens. To start the test tap the black circle in the upper left corner and data including the HV Battery Voltage and Current will...

Sorry about that. I seem to have forgotten that request so not included in this test release of LeafSpy Pro. As I recall now, the way it would work is you detect the voltage drop for a given large current increase. I might see if I can implement this in a custom screen with instructions on how...

Yes, that can be done. There is code that handles the timeout when the Leaf does not respond which today delays a few seconds and retries. I can change that code for a 2018+ Leaf so the Service code sets a flag the foreground code can check and then ask the user to turn on the Leaf and press...

Requested by a user so he can start a charge in the garage and then receive an alarm on his phone when the charge level has reached a preset SOC%. Then he can manually stop the charge. Works best if you use a WiFi OBDII which would have longer range than Bluetooth. Phone can be off because...

Safe Mode uses a passive way to detect if the Leaf has been turned on. This is what prevents the clicking when the Leaf is asleep and a connection is attempted. However, passive mode cannot detect if a 2018 or newer Leaf is on or off. So the active mode must be used which will cause the relay...

At last a new updated version of LeafSpy Pro is ready for testing. If you have LeafSpy Pro you can use this link to try it out and give me feedback. There is also an updated PDF of the built-in help. The major improvements are the support for Gauges which are much better at displaying the...