Search results

Unfortunately, I don't have access to a first-generation model to verify it. I did use a service manual to find many of the wire locations (though the wire colors were incorrect.

I don't know about the ZE1 designation but yes my car is a 2018 Leaf SL which is the first year of the second generation (40 Kw) leaf. When it comes to actually doing the wiring, I would recommend my second method of using Metra AX-DSP harness and modifying it as opposed to buying the two other...

I changed out the fluid in my '18 SL yesterday at 35k miles. The magnets were covered and the fluid was very dark. I used Redline D6. I'll keep doing it at 30-35k from here on out.

I've confirmed that a Metra AX-DSP- NIS1 allows you to plug in at the H/U and get all four signal pairs without having to repin a harness. I simply used the T part of the harness and cut off the black plug and added a set of female RCA's so I can add a standard set of RCA's to the amp. If you...

This is the two harness' that I used: Metra 70-7302 https://www.amazon.com/Metra-70-7302-Wiring-Harness-Hyundai/dp/B000SBKP8S Metra 70-2057 https://www.amazon.com/Metra-70-2057-2014-Bypass-Harness/dp/B012PRQPPY I don't have the pin out handy but I can look though some of my notes once I get...

I'm not overly familiar with how the climate information is displayed on the '16 but on the '18 SL that I have with the OEM radio, only the temperature is shown on the screen during times that it gets adjusted (and even then I don't agree with the temp that is displayed versus what it actually...

If it were me, I would take it to the dealer and let them look at it first, especially if there is a specific quality that is "flakey", assuming your '18 is still under warranty. With most things electronic these days, the more specific you can be, and the more repeatable the issue is, the more...

Start by pulling the trim panel from behind the door handle and remove the screw. Remove the trim from around the window switches (starting at the back and sliding back since there is a sideways tab) and remove the screw from just ahead of the door pull. Once you've got those two screws removed...

I did this recently on my '18 SL. I didn't have any issues with the installation, nor the wiring. My only suggestion is to mount the horns under the main "radiator" core support (or where one would be mounted, on either side of the HV cables coming from the charge connectors) using the supplied...

No risk as long as you are familiar with panel tools. The shiny panel in the arm rest can be easily damaged if you aren't careful with your panel tools, other than that it's relatively easy swap, and easy to go back if you choose.

For those interested, the Altima switches do fit the '18. I did the swap on my SL without any issues.

You are right that the OEM drivers should have better bass, with less high frequency information. The OEM drivers are generally made with a paper cone that is slightly heavier and relays the lower frequencies better. The coax that you used do have the tweeter but they are playing right into your...

Although I haven't installed a dashcam that supported a rear camera, I would guess that the connection to the dash cam would be your first obstacle. Generally companies will source manufacturer specific connectors even if the signal can be interfaced.

My process was fairly painless. My panel is right above the outlet in the garage, plus the fee for the permit was so cheap it was a no brainer. The only thing the inspector said to me was "you're not an electrician, you can tell from how neat the work is." The remainder of his time at my home...

I swapped my battery to an XS Power 5100 when I added the stereo to my 2018 SL. I don't think it's entirely necessary but I had the battery from my last car.

It depends on where you live. I used to live in a rural area that did not require any permit for electrical work (even the new construction portion which checked at the final inspection) . Where I currently live as a homeowner I can get a permit on my own home, and perform the work, and no...

I've got an '18 SL with about 12k miles on it since the first of July. It was 24 degrees F this morning and the telematics showed a change of 4 miles in range if the HVAC system were switched off. I generally have the HVAC set at 67 degrees F and use the seat heater on low, even this morning. My...

I've added two amps (approximately 3k watts RMS) using a 1/0 power wire into a 300A fuse, There are a lot of factors that can go into figuring out what will happen but in my case I haven't had an issue. Most amps won't pull near as much current due to program material versus pure tones, but you...

I've added two amps to my '18 SL, with no serious adverse degradation so far. I managed to source some connectors to add onto the OEM H/U so I only have to cut two wires. For most people, adding a simple amp and sub will be fine, as long as the install is completed properly.

Great work!!! I've got an '18 SL that I'm in the process of updating the stereo in as well. I've got a 1/0 power wire from the battery to the distribution block, feeding to PG amps with around 3k RMS. You'll be fine with all of the plans you have. I would recommend keeping it simple, at least...