Search results

My Nissan Leaf Forum

Help Support My Nissan Leaf Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Piro

    Nissan Leaf Gen1 - Performance Chip Tuning

    I have finished a new software mod for Nissan Leaf Gen1 (24, 30kWh). It delivers One Pedal Drive in mode D, astonishing 40+kW regen till full stop, 90kW (122 hp) power and 300 Nm (+30Nm more torque). Feel like owning a new Nissan Leaf Gen2, with improved regen even in cold winter, till the full...
  2. Piro

    Video: EVSE with grid monitoring vs 2000W water kettle. Will it prevent trip breakers?

    A test of Grid Monitoring used in Accelev https://www.facebook.com/EVSEChargerAccelev/ Car loads with a max speed of 16A, as the breaker is 16A. Then I start a water kettle (2000W) - once with Grid Monitoring at charger is on the second time - off. I restart charging, as charger needs 1 minute...
  3. Piro

    SOP - State of Power. Parameter that shows electric grid quality.

    SOP (State of Power) is a new parameter, calculated and monitored by our electric car chargers (Accelev), starting from 2.12 firmware (update your charger to see SOP). SOP is intended to be a piece of information about energy grid delivery quality. Technically SOP depends on the internal...
  4. Piro

    My last project - charger with grid monitoring (speed lowering when other load detected)

    Huh, my wifey hiper-duper-hairdryer does not trip our fuses anymore :) Grid Monitoring = Load Detection & Speed Lowering. How does it work? A simple example with water kettle fighting for power against my Accelev 2phase->1phase charger. The kettle is connected to one of the power phases. Using...
  5. Piro

    Table of EV / PHEV cars with plug types, powers etc.

    Please help me and verify table of EV cars with plug types, powers, phases count etc. http://evtun.com/chargers/accelerate-your-home-charging-home-charging-explained.html
  6. Piro

    Accelerated EVSE AC charger J1772 from 3-phase sources

    Actual list of possible setups for Accelev: Source: 3F 400V using 2-phases 5.0 kW (11,5A per phase) Source: 3F 400V using 2-phases 6.0 kW (14,0A per phase) Source: 3F 400V using 3-phases 8.0 kW (11,5A per phase) Source: 3F 230V using 3-phases 8.0 kW (11,5A per phase) Norway special...
  7. Piro

    Dual-phase 2x faster home charger

    This is my last project - 4.4-4.8kW 2-phase Type1 portable electric car charger at your home - without special 32A power lines... It uses 3phase power connection to generate one "superphase" and charge Type1 cars (Leaf). 2 phases are loaded equally. It also has a special mode for battery safe...
  8. Piro

    Nissan Leaf 30kWh real max range with one charge

    Nissan Leaf 30kWh, SOH = 96%, temp. 15C, speed 50-70km/h (avg: 58,4km/h), flat area, some small hills, no heating. 17inch wheels (Tekna), LeafBox installed, driving only in D-mode, ECO. Strategy: coasting as much as possible, while driving uphills - 50km/h, while driving larger flat areas -...
  9. Piro

    Fast charger for Type1 with 2-phase or 3-phase source

    I have built for my Leafs an alternative to factory AC charger Type1 (Leaf), and the only 3-phase charger for Type1. It can balance load on 2 or 3 phases (depending on version), enabling charging with full speed (3,6 kW, 4,8 kW, 7,2 kW) using equal current on each phase. Do you think that there...
  10. Piro

    Best range ever of 24kWh Leaf?

    Please tell me what is best range ever proven for 24kWh Leaf with one charge till turtle?
  11. Piro

    Extending range of 24kWh Leaf with LeafBox

    Hello all, I'm Thomas, developer of Outlander PHEVBox Range Extender and also new LeafBox - and also proud Leaf 24kWh owner :) As I have finished LeafBox project and final tests are conducted now by various Leaf owners, I have a question if anybody would like to be a beta tester. I still have...
Back
Top