Search results

Hello, My plan is to connect two battery blocks of 54V each (5kWh+5Kwh) in series so that I get aprox 110V DC, after which I need a DC DC booster for the main battery on the Nissan Leaf, that is 370-395V. I have already made a 96S battery and connect it directly to the Leaf's main battery, but...

For info, I have successfully replaced water pump 1 without any problems. I sucked up all the coolant with the pump (blue tank in the picture). Easily replaced pump 1 in the rubber bearing. There are some pictures attached. I bought a used pump from Estonia for 40 Euros. The total time I spent...

Maybe someone knows if these two pumps are connected in series. Does each pump have its own water circuit? Namely, in my case, since pump 1 is broken, it seems to me that pump 2 is working very loudly at full blast. I am waiting for a spare part and would use the car for approx. 20 km a day at a...

https://www.youtube.com/watch?v=T0wnQ29aAQw I found an interesting video about pump repair. I will try to repair the pump for repair I need FDD8444 transistor and it will take some time to get it. What do you think, can I drive with the P31E9 error code because it's winter time now and things...

Hello, Anyone know where can I get connector for LBS Nissan leaf 2012. br Atkam

Hi, I not calculating internal resistance, and min max C before start a project but just setup a battery 96S22p and working fine. (internal resistance is lower in main battery then additional battery - this is simplify a lot of think) some pic in link below...

diy - upgrade battery to 38KWh https://www.youtube.com/watch?v=Z04PcmVkF34&t=1s

Hi, I make a Debug Trace ELM (on LeafSpy restrat) and from trace see the same. Question is LBC ok or is the reason that I connect only ODBII without battery and temperature sensors. I like to know because before I invest a lot of work to connect all wire to battery...

Hello, I intend to use the LBC (BMS) Nissan Leaf 2012 for the monitoring voltage for additional battery 96S pack integrated into the power line (+, - out of the main battery). Does anyone advises me why leafspy does not connect with BMS (the green link icon is lit only occasionally on leafspy)...

Hello, I like to buy a connectors for BMS Nissan Leaf 2012 - all white connectors on BMS. I will pay via Paypal. I will use BMS for additional battery integrated in Nissan leaf 2012, Connectors with wires long maximum as you have. thank you

ATKAM Interesting plan. My question how to get a DC/AC for 400V DC to 240VAC converter. I already looking and not find it. I thing is very interssting project because cover emergency power for home.. I have a similar plan to V2H. Free of charge car, drive to home and power supply home,... :)

Some additional information of my integration: 1. I integrate secondary battery 22p96s, 6 box - each box 16 block with 22p 18650 cells. 2. I'm connected in line with the big power wires coming out of the main pack. 3. I have 3 tyco contactors to connect primary and secondary pack together 4...

Finally I finish with full integration my additional battery parallel with main battery. I expect additional 100-150 km. Testing is in progress. Please find below some sample picture. thank you: turbo3, gerygid, leaf xpack, jehugarcia, Njah kavin, HBPowerwall, Damien Maguire, Wolf Tronix...

Hi Thank you very much "Collink" for very important basic input because confirm my principle how to plan to do it. Is observing status of main pack contractor + voltage primary and secondary battery pack enough for connect battery together or you on your case check additional conditions (form...

Hello! For several months as I work on the project "additional battery in parallel with the main in my nissan leaf y2012. Planned additional battery 22p96s 18650 -15-20kwh - aprox 120kg. I read the forum and Nissan documentation and examines the contributions of members to the Forum (turbo3...