Recent content by crunchy3d

After 5 years of driving and more than 100000 miles, here are SOH charts for my Leaf 2.zero (40 kWh, MY 2018) Average consumption was above 4.4 miles/kWh and daily SOC was between 40 % and 70 %. Current SOH is above 85 % (jumped up from 84 % few days ago).

Checked and the directory exists: \Android\data\com.Turbo3.Leaf_Spy_Pro\files\LOG_FILES Thanks again!

I will check it. Thanks.

Under Options I only have Skip reading headlight status, Disable forcing energy display, Disable sound, Enable delayed Leaf transfer mode 30 ms, LELink^2 zero power mode, Safe mode and Exit after trip/chrg saved

For more than 4 years I recorded every one of my trips on my cell phone (Leaf Spy Pro). A few days ago I tried to download the last batch of logs (1.5 years) from my phone. I found that there were none. In the setup, data logging was enabled ("Enable Data Logging"), but there was no new file...

Of course it can't use full power at speed 0. In fact, the power is 0. Why? Power = Torque * rotational speed If speed is 0, mechanical power is 0, but torque can still be significant. In fact most EV have maximum torque from zero speed to some specific speed where Torque * rotational speed =...

It works, now. Thank you very much! :)

Interesting. I did not get any new file. Even the empty one. Strange.

Still does not log if not reading cell pair voltages. @virol, anybody else confirming it?

I am using screen 4 (not custom screen 3). The pattern is as described. When checking "Log Cell Voltages" everything works as usual. Deselecting it causes no data written to Log file. First I thought that the problem is that I upgraded in the morning after one trip, so the afternoon trip was not...

New info. If "Log Cell Voltages" in menu "Logging" is selected (checkbox is selected), the Log_*.scv file is created. Otherwise Log_*.scv file is not created! @Turbo3, I suppose it is a bug and Log_*.scv file should be created in both cases, except that cell voltages are not written if the...

Unfortunately, from updating to beta version I can't get any new Log files. Only TripChrgLog*.csv file is updated with new trips, while Log_*.scv files are not created or new data appended to old file (in the same day, of course). My settings are (the relevant ones): Logging: - Enable Data...

Thank you very much! Hardly waiting to test it on my next trip! ;)

I am sure that almost everyone would agree and rather have updated app with added "phonecalls". Moreover, I suppose that it's not so hard to block updating this particular app in Android for those who are against the mentioned policy.

Yes, the tire pressure, for example. However, RPM is displayed on custom screen if selected, while it does not exist in Log file. As far as I remember this is not the only variable which can be displayed on custom screens, but which is not saved in log file. I suppose it can be easily added to...