Recent content by braebyrn

For anyone else that might be looking, here is one for the 2011-2012 models. Paul Kennett provided these printable plugs here.... https://www.myminifactory.com/object/3d-print-nissan-leaf-b24-compatible-connector-93715.

Thanks alozzy. Just need to get the 2011, 2012 version. I went to the wrecking yard today but the yard guys just cut and toss them when they pull the traction battery.

I picked up a 2012 battery recently and was wondering who has or if there is a tool or device to plug into the data port at the battery and check the condition of each cell? Is that possible? Seems to me there was a video of someone doing this at one time. Surely I could take off the cover...

I get all kinds of answers from the search, but nothing that shows who did it and or how. What keywords would you suggest? I have tried many and spent a couple of hours without success. Was hoping that someone that has done the addition would chime in. We are not afraid of diving into the...

I have a wrecked 2013 Leaf that has the Quick Charge port and wondered if it could be swapped into a 2014 S model? Has someone here done it? I tried the search feature but didn't come up with anything yet. Thanks

I have four doors from a red 2011 leaf. The right rear is damaged, but the others are in great shape. They include the hinges, door panels, wiring, mirrors, Etc. They were just unbolted and put in storage. I'm located near Seattle and can deliver for a small fee. I am not sure what years this...

I don't even remember posting this years ago. Good to know that the brush replacement worked for some. I haven't had this happen again as far as I recall.....

I wonder if the extra wires are for the motorized low beam adjustment like I have on my 2012 Leaf? There is an adjustment dial on the dash to the left side of the steering wheel by the traction control and steering wheel heater switch. I'm going to attempt to install a 2013 SL headlight...

Looking for the best place to purchase a 2014 Nissan Leaf Service Manual. Online is fine as long as I can use the shortcuts and not like where you have to scroll through each page offered on some websites. I wanted to download it into my laptop and easily navigate from the different sections...

Could it have anything to do with the fact that the battery from the 2013 is an SL model and the 2014 is an S model? The 2013 has the heat pump and the 2014 does not. Hmmm.

Thanks for reminding us. Did Cor also say to make sure and plug them in correctly as there are two plugs that look exactly alike and they could be accidentally plugged into the other. I will have to reread that, but we made sure to swap them exactly as they came off. There are differences...

The voltage on the accessory battery was in 12.24 volts range according to the screen shot on Leafspy. Is that too low? What else can you tell from the screenshot? https://photos.app.goo.gl/cnpX346oZ3daTkte6

Heard back from the previous owner about the original BMS. He did give us the matching original BMS that came from the car. He also said that before he took the battery out, he drove the car. We have the original to the 2014 Leaf BMS box installed in the 2013 traction battery and it is...

I forgot about the kw, kWh. I was being asked questions while I was composing the original post. Thanks for catching that. Would it still have to be re-paired if all of the pertinent electronics get transferred? That's what I don't understand. If you transfer over the traction battery...